HELIOS top-mounted dryers are positioned on a base frame with docking plates. The drying containers may be removed and carried to the processing device. They are mounted directly on the feeding section and the dried material can be processed. If the material should be kept dry on the machine, a JETBOXX® docking plate can be used, that is connected to a dryer control.
|Docking plate with
with locking lever
|Dryer control||Docking unit||Drying container with
The docking plate serves as holding device for the dryer control and as docking station for changing drying containers, mounting with machine adapter on sliding rail.
When the drying time has elapsed the hermetically sealed containers can be moved comfortably by rack to the point of consumption.
When changing the setting of task the components can be combined easily or used as top-mounted dryers again.
The dryer filled with dried granules is attached directly onto the feed section of the injection molding machine via a sliding rail.
A docking plate with dryer control is fixed on the injection molding machine. The drying containers are docked via a sliding rail.
The docking plate including the dryer control is fixed directly on the injection molding machine. The drying containers are docked via a sliding rail. The dried granules are conveyed via a sucion device onto the injection molding machine.
The docking plate and dryer control are mounted on a base frame / stand-alone station.
Application as stand-alone station / dryer as insular solution
|A Height [mm]||739||739||739|
|Electrical power supply||Central power supply for all docking areas (optional)|
|Sliding rail||Bevelled on both sides, for L-claw 80 x 15 mm or 80 x 20 mm|
|Trolley||Suction / Discharge devices|
|for transport from pre-drying station to point of consumption sliding rail 80x15 mm or 80x20 mm|