Big-Bag & Oktabin
Plastic granulate dryer
Granulate + Regrind
Integration of all HELIO®Clean dedusting devices in conveying systems of any make
The HELIOS dedusting module is an outstanding new development which can be fitted to existing conveying systems regardless of the manufacturer. When supplying material, abrasion occurs depending on the length of the conveying distance and the number of diverte pipes. This abrasion in the form of dust or angel hair may result in serious problems at the feeder area of the processing machine or the end product. The innovative HELIOS dedusting module steps in precisely where real problems exist and therefore where there is need to take action.
The existing on-site conveying equipment will remain in use - it is only moved sideways onto a sliding rail. In this new position there is a suction device under the sliding rail from which the material conveyed is sucked into the HELIOS dust separation device, the dust is removed portion by portion and then it is transferred to the processing machine (type A).
If the processor does not need dust removal on this conveyor at times, the HELIOS deduster can be moved to a park position and the conveying equipment is moved to the original position again via the feeder area. The conveyed material then flows again without detour into the processing machine.
*depending on material and required degree of dedusting – example based on PMMA/PC
HELIOS dedusters remove dust by using a patented, 3 stage process by separating the air with an ion shower.
There are 3 ranges of dust separators for material flow rates of up to 25/35 kg/h* or up to 50 kg/h* for each conveying point available.
The upgrade kit, consisting of a sliding rail with an adapter for fixing it to the processing machine and suction device for the HELIOS deduster of the series:
is suitable for any conveying equipment available.
Option: 5-litre intermediate container for on-site conveyor.
*depending on material and required degree of dedusting - Example based on PMMA/PC
without parking possibility for the deduster
Continuing dedusting: the dedusting module type A 1 / type A 2 is a compact upgrade set that supplements the existing conveying system with a permanently installed dedusting solution. Type A 2 offers a longer distance to the deduster.
with parking possibility for deduster in case of non-use
Maximum flexibility: With the type B dedusting module, the deduster can be moved to the parking position by sliding it sideways. This allows the production to be switched from the dedusted material to non-dedusted material without retooling of the machine.
HELIOS deduster sucks material from suction device under the conveying device and leads the dedusted material directly to the feed zone.
Deduster is in parking position. At site existing conveying unit transfers the material directly back to the processing machine.
Dedusting module type A 1 with HELIOS deduster HELIO®Clean 3.
material throughput up to 25 kg/h*
Dedusting module type A 1 with HELIOS deduster HELIO®Clean Pro 10.
material throughput up to 35 kg/h*
Dedusting module type A 2 with HELIOS deduster HELIO®Clean Pro 20.
material throughput up to 50 kg/h*
*depending on the material to be dedusted and the degree of dedustingrequired - example based on PMMA/PC
Benefits through professional cleaning of plastics before processing.
Compact dedusting device for the safe removal of dust from plastic granulate and regrind.
Granulate deduster with high throughput. Developed for plastic injection moulding.
Find the suitable HELIO®Clean dedusting device for your task.
Just send us a quick message and we’ll gladly get back to you via phone or mail to answer any open questions.
We will gladly answer all open questions.
The data sent will only be processed for the purpose of processing your request. You can find further information in our data protection declaration.